Ürün arama
Açıklama
Planet IGS 4215 4P4T2S 10/100/1000 Endüstriyel PoE Switch
Teknik Özellikler
Donanım Özellikleri | |
Copper Ports | 8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
SFP/mini-GBIC Slots | 2 1000BASE-SX/LX/BX SFP interfaces (Port-9 and Port-10) |
Compatible with 100BASE-FX SFP | |
PoE Injector Port | 4 ports with 802.3af/802.3at PoE injector function (Port-1 to Port-4) |
Console | 1 x RS232-to-RJ45 serial port (115200,8, N, 1) |
Switch Architecture | Store-and-Forward |
Switch Fabric | 20Gbps/non-blocking |
Switch Throughput@64 bytes | 14.8Mpps @64 bytes |
MAC Address Table | 8K entries |
Shared Data Buffer | 4.1 megabits |
Flow Control | IEEE 802.3x pause frame for full-duplex |
Back pressure for half-duplex | |
Jumbo Frame | 10 Kbytes |
Reset Button | < 5 sec: System reboot |
> 5 sec: Factory default | |
LED | 3 x LED for System and Power: |
Green: DC Power 1 | |
Green: DC Power 2 | |
Green: Power Fault | |
2 x LED for PoE Copper Port (Port-1~Port-4): | |
Green: LNK/ACT | |
Orange: PoE-in-use | |
2 x LED for 10/100/1000T Copper Port (Port-5~Port-8): | |
Green: LNK/ACT | |
Orange: 1000Mbps | |
2 x LED for per mini-GBIC interface (Port-9 and Port-10) | |
Green: LNK/ACT | |
Orange: 1000Mbps | |
4 x LED for PoE Power Usage (W) | |
Orange: 30, 60, 90 and 120W | |
Connector | Removable 6-pin terminal block |
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 | |
Alarm | One relay output for power failure. Alarm relay current carry ability: 1A @ 24V AC |
Power Requirements | 48~56V DC, 3.5A (max.) |
Power Consumption/ Dissipation | 5.04 watts, 17.1BTU (Standby without PoE function) |
8.96 watts, 30.5 BTU (Full loading without PoE function) | |
152.96 watts, 521.8 BTU (Full loading with PoE function) | |
Dimensions (W x D x H) | 161 x 107 x 72 mm |
Weight | 1004g |
ESD Protection | 6KV DC |
Enclosure | IP30 aluminum case |
Installation | DIN-rail kit and wall-mount ear |
Power over Ethernet | |
PoE Standard | IEEE 802.3af/802.3at Power over Ethernet PSE |
PoE Power Supply Type | End-span |
PoE Power Output | IEEE 802.3af Standard |
- Per port 48V~56V DC (depending on the power supply), max. 15.4 watts | |
IEEE 802.3at Standard | |
- Per port 50V~56V DC (depending on the power supply), max. 36 watts | |
Power Pin Assignment | 1/2(+), 3/6(-) |
PoE Power Budget | 144 watts (depending on power input) |
Max. Number of Class 2 PDs | 4 |
Max. Number of Class 3 PDs | 4 |
Max. Number of Class 4 PDs | 4 |
Layer 2 Functions | |
Port Mirroring | TX/RX/Both |
Many-to-1 monitor | |
VLAN | 802.1Q tagged-based VLAN |
Up to 256 VLAN groups, out of 4094 VLAN IDs | |
802.1ad Q-in-Q tunneling (VLAN stacking) | |
Voice VLAN | |
Protocol VLAN | |
Private VLAN (Protected port) | |
GVRP | |
Management VLAN | |
Link Aggregation | IEEE 802.3ad LACP and static trunk |
Supports 4 groups with 4 ports per trunk | |
Spanning Tree Protocol | IEEE 802.1D Spanning Tree Protocol (STP) |
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) | |
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) | |
STP BPDU Guard, BPDU Filtering and BPDU Forwarding | |
IGMP Snooping | IPv4 IGMP snooping v2, v3 |
IGMP querier | |
Up to 256 multicast groups | |
MLD Snooping | IPv6 MLD snooping v2, v3, up to 256 multicast groups |
Access Control List | IPv4/IPv6 IP-based ACL/MAC-based ACL |
IPv4/IPv6 IP-based ACE/MAC-based ACE | |
QoS | 8 mapping IDs to 8 level priority queues |
- Port number | |
- 802.1p priority | |
- DSCP/IP precedence of IPv4/IPv6 packets | |
Traffic classification based, strict priority and WRR | |
Ingress/Egress Rate Limit per port bandwidth control | |
Security | IEEE 802.1X port-based authentication |
Built-in RADIUS client to cooperate with RADIUS server | |
RADIUS/TACACS+ authentication | |
IP-MAC port binding | |
MAC filtering | |
Static MAC address | |
DHCP snooping and DHCP Option82 | |
STP BPDU guard, BPDU filtering and BPDU forwarding | |
DoS attack prevention | |
ARP inspection | |
IP source guard | |
Storm control support | |
- Broadcast/unknown unicast/unknown multicast | |
Management Functions | |
Basic Management Interfaces | Web browser, Console,Telnet, SNMP v1, v2c, v3 |
Firmware upgrade by HTTP/TFTP protocol through Ethernet network | |
Configuration upload/download through HTTP/TFTP | |
Remote/local syslog | |
System log | |
LLDP protocol | |
SNTP | |
PLANET Smart Discovery Utility | |
Secure Management Interfaces | SSH, SSL, SNMP v3 |
SNMP MIBs | RFC 1213 MIB-II |
RFC 1215 Generic Traps | |
RFC 1493 Bridge MIB | |
RFC 2674 Bridge MIB Extensions | |
RFC 2737 Entity MIB v2 | |
RFC 2819 RMON (1, 2, 3, 9) | |
RFC 2863 Interface Group MIB | |
RFC 3635 Ethernet-like MIB | |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Stability Testing | IEC 60068-2-32 (free fall) |
IEC 60068-2-27 (shock) | |
IEC 60068-2-6 (vibration) | |
Standards Compliance | IEEE 802.3 10BASE-T |
IEEE 802.3u 100BASE-TX/100BASE-FX | |
IEEE 802.3z Gigabit SX/LX | |
IEEE 802.3ab Gigabit 1000BASE-T | |
IEEE 802.3x Flow Control and Back Pressure | |
IEEE 802.3ad Port Trunk with LACP | |
IEEE 802.1D Spanning Tree Protocol | |
IEEE 802.1w Rapid Spanning Tree Protocol | |
IEEE 802.1s Multiple Spanning Tree Protocol | |
IEEE 802.1p Class of Service | |
IEEE 802.1Q VLAN Tagging | |
IEEE 802.1x Port Authentication Network Control | |
IEEE 802.1ab LLDP | |
RFC 768 UDP | |
RFC 793 TFTP | |
RFC 791 IP | |
RFC 792 ICMP | |
RFC 2068 HTTP | |
RFC 1112 IGMP v1 | |
RFC 2236 IGMP v2 | |
RFC 3376 IGMP v3 | |
RFC 2710 MLD v1 | |
RFC 3810 MLD v2 | |
Environment | |
Operating | Temperature: -40 ~ 75 degrees C |
Relative Humidity: 5 ~ 95% (non-condensing) | |
Storage | Temperature: -40 ~ 85 degrees C |
Relative Humidity: 5 ~ 95% (non-condensing) |
Planet IGS 4215 4P4T2S 10/100/1000 Endüstriyel PoE Switch Pdf Dosyası2.83 MB
Teknik Kısa
PoE : Hibrid
Port Hızı : 100 Mbps
Yönetilebilirlik : Yönetilebilir Layer 2
PoE Güç Bütçesi : 130-200 Watt
PoE Port Sayısı : 4 Port
Montaj Tipi : Wall Mount
Aktarım Port Sayısı : 2
Aktarım Türü : Gbit Fiber