Ürünler

Ürün arama

Açıklama

Huawei S5700 52C PWR EI 10/100/1000 PoE Switch

Teknik Özellikler

 Fixed Ports     
48 x 10/100/1,000 Base-T
Extended Slots     
S5700C provides two extended slots, one for an uplink subcard and the other for a stack card.
S5710C providestwo extended slots for uplink subcards.
MAC Address Table     
IEEE 802.1d compliance
32K MAC
MAC address learning and aging
Static, dynamic, and blackhole MAC address entries
Packet filtering based on source MAC addresses
VLAN     
4K VLANs
Guest VLAN and voice VLAN
GVRP
MUX VLAN
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports
1:1 and N:1 VLAN Mapping
Reliability
RRPP ring topology and RRPP multi-instance
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover
SEP
ERPS (G.8032)
BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM
STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s)
BPDU protection, root protection, and loop protection
E-Trunk
IP Routing     
Static routing, RIPv1/v2, RIGng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, and ECMP
IPv6 Features     
Neighbor Discovery (ND)
Path MTU (PMTU)
IPv6 ping, IPv6 tracert, and IPv6 Telnet
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type
MLD v1/v2 snooping
IPv4 and IPv6 dual stack
6to4 tunnel, ISATAP tunnel, and manually configured tunnel
Multicast     
IGMP v1/v2/v3 snooping and IGMP fast leave
Multicast forwarding in a VLAN and multicast replication between VLANs
Multicast load balancing among member ports of a trunk
Controllable multicast
Port-based multicast traffic statistics
IGMP v1/v2/v3, PIM-SM, PIM-DM, and PIM-SSM
MSDP
QoS/ACL     
Rate limiting on packets sent and received by an interface
Packet redirection
Port-based traffic policing and two-rate three-color CAR
Eight queues on each port
WRR, DRR, PQ, WRR + PQ, and DRR + PQ queue scheduling algorithms
WRED (supported by the S5710-EI)
Re-marking of the 802.1p priority and DSCP priority Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source
IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID
Rate limiting in each queue and traffic shaping on ports
Security
User privilege management and password protection
DoS attack defense, ARP attack defense, and ICMP attack defense
Binding of the IP address, MAC address, interface, and VLAN
Port isolation, port security, and sticky MAC
Blackhole MAC address entries
Limit on the number of learned MAC addresses
802.1x authentication and limit on the number of users on an interface
AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC
SSH v2.0
Hypertext Transfer Protocol Secure (HTTPS)
CPU defense
Blacklist and whitelist
Management and Maintenance     
iStack
MAC Forced Forwarding (MFF)
Virtual cable test
SNMP v1/v2c/v3
RMON
Web NMS
System logs and alarms of different levels
NetStream (supported by S5710-EI)
sFlow
Interoperability     
Supports VBST (Compatible with PVST/PVST+/RPVST)
Supports LNP (Similar to DTP)
Supports VCMP (Similar to VTP)
Operating Environment     
Operating temperature: 0°C to 50°C
Relative humidity: 5% to 95% (non-condensing)
Input voltage     
AC:
Rated voltage range: 100V to 240V AC, 50/60 Hz Maximum voltage range: 90V to 264V AC, 50/60 Hz
DC:
Rated voltage range: –48V to –60V, DC Maximum voltage range: –36V to –72V, DC
Note: PoE-support switches do not use DC power supplies.
Dimensions (W x D x H)     
442 mm x 420 mm x 43.6 mm
Power Consumption    
PoE model: < 930W
(PoE: 740W)

 

 

Teknik Kısa

PoE : PoE
Port Hızı : 1 GBit
Yönetilebilirlik : Yönetilebilir Layer 3
PoE Port Sayısı : Tooltip 48 Port
PoE Güç Bütçesi : 400-800 Watt