Ürün arama

Açıklama

Planet FGSW 2624HPS 10/100 PoE Switch

Özellikler

Physical Port

24-port 10/100BASE-TX RJ45 copper with 24-port IEEE 802.3at/af PoE injector
2-port 10/100/1000BASE-T Gigabit RJ45 copper
2 1000BASE-X mini-GBIC/SFP slots, shared with port-25 to port-26
Reset button for system management

Power over Ethernet

Complies with IEEE 802.3at Power over Ethernet Plus Mid-span PSE
Up to 24 IEEE 802.3at / 802.3af devices powered
Supports PoE Power up to 30.8 watts for each PoE port
Detects powered device (PD) automatically
Circuit protection prevents power interference between ports
Remote power feeding up to 100m
PoE Power Usage

PoE Management

Per port PoE function enable/disable
PoE Port Power feeding priority
Per PoE port power limit
PD classification detection
PoE power sequential
Layer 2 Features
Supports broadcast storm control
Supports VLAN
IEEE 802.1Q tag-based VLAN, up to 32 VLANs groups, out of 4095 VLAN IDs
Port-based VLAN, up to 26 VLAN groups
MTU VLAN (Multi-tenant Unit VLAN)
Supports Link Aggregation
802.3ad Link Aggregation Control Protocol (LACP)
Cisco ether-channel (static trunk)
Supports Spanning Tree Protocol
STP, IEEE 802.1d Spanning Tree Protocol
RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
Port mirroring to monitor the incoming or outgoing traffic on a particular port
Provides port mirror (Many-to-1)

Quality of Service

2 priority queues on all switch ports
Traffic classification
Port-based priority
IEEE 802.1p-based priority
IP TOS / DSCP-based priority
TCP / UDP port-based QoS
Strict priority and Weighted Round Robin (WRR) CoS policies

Multicast

Supports IGMP Snooping v1 and v2 (excluding IGMP Query feature)

Security

Physical port to MAC address binding
TCP/UDP port number filter: Forwarding or discarding typical network applications
Port mirroring to monitor the incoming or outgoing traffic on a particular port

Management

Switch Management Interfaces
Web switch management
SNMP v1 switch management
Firmware upload/download via HTTP
Hardware reset button for system reboot or resetting to factory default

Teknik Özellikler

Hardware Specifications
10/100Mbps Copper Ports	24 10/100BASE-TX RJ45 auto-MDI/MDI-X ports
Gigabit Copper Ports	2 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots	2 1000BASE-X SFP interfaces, shared with Port-25 to Port-26
Switch Architecture	Store-and-Forward
Switch Fabric	8.8Gbps / non-blocking
Throughput	6.54Mpps@64Bytes
Address Table	4K entries, automatic source address learning and ageing
Shared Data Buffer	2.75Mb embedded memory for packet buffers
Flow Control	IEEE 802.3x pause frame for full-duplex
Flow Control	Back pressure for half-duplex
Maximum Transmit Unit	1518 Bytes
Reset Button	< 5 sec: System reboot
Reset Button	> 5 sec: Factory default
Dimensions (W x D x H)	440 x 210 x 44mm, 1U height
Weight	2.8kg
Power Consumption	Max. 248watts / 846BTU
ESD Protection	Contact Discharge 4KV DC
ESD Protection	Air Discharge 8KV DC
LED	System:
	Power (Green)
	10/100BASE-TX RJ45 Interfaces (Port 1 to Port 24):
	10/100Mbps LNK/ACT (Green)
	PoE-in-Use (Orange)
	10/100/1000BASE-T RJ45 / SFP Interfaces (Port 25 to Port 26):
	LNK/ACT (Green)
	100/1000 (Green)
Cable	Twisted-pair:
	10BASE-T: 2-pair UTP Cat 3, 4, 5 for up to 100 meters
	100BASE-TX: 2-pair UTP Cat 5, 5e for up to 100 meters
	1000BASE-T: 4-pair UTP Cat 5e, 6 for up to 100 meters
	Fiber-optic Cable:
	1000BASE-SX:
	50/125μm or 62.5/125μm multi-mode fiber-optic cable, up to 550m (varying on SFP module)
	1000BASE-LX:
	9/125μm single-mode fiber optic cable, up to 10/20/30/40/50/70/120 kilometers (varying on SFP module)
Power over Ethernet
PoE Standard	IEEE 802.3af / 802.3at PoE+ / PSE
PoE Power Supply Type	Mid-span
Power Pin Assignment	4/5(+), 7/8 (-)
PoE Power Output	Per Port 53V DC, Max. 30.8 watts
PoE Power Budget	220 watts (max.) @ 25 degrees C
PoE Power Budget	190 watts (max.) @ 50 degrees C
PoE Ability	PD @ 7 watts: 24 units
	PD @ 15.4 watts: 14 units
	PD @ 30 watts: 7 units
Layer 2 Functions
Port Configuration	Port disable / enable
	Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
	Flow Control disable / enable
Port Status	Display each port’s speed duplex mode, link status, flow control status, auto negotiation status and trunk status
Port Mirroring	TX / RX / Both
Port Mirroring	Many-to-1 monitor
VLAN	802.1Q tagged-based VLAN, up to 32 VLAN groups, out of 4094 VLAN IDs
	Port-based VLAN, up to 26 VLAN groups
	MTU VLAN
Link Aggregation	1 group of 2-Port 10/100/1000BASE-T trunk supported
QoS	Allows to assign low / high priority on each port
QoS	First-In-First-Out, All-High-before-Low, Weight-Round-Robin QoS policy
IGMP Snooping	IGMP (v1 / v2) Snooping, up to 32 multicast groups
IGMP Snooping	Without Query supported
Security Control	MAC address binding
Security Control	TCP & UDP filter
Management Functions
Basic Management Interfaces	Web browser, SNMP v1
Standards Conformance
Regulation Compliance	FCC Part 15 Class A, CE
Standards Compliance	IEEE 802.3 Ethernet
	IEEE 802.3u Fast Ethernet
	IEEE 802.3ab Gigabit Ethernet
	IEEE 802.3z Gigabit Ethernet over Fiber-Optic
	IEEE 802.3x Full-duplex flow control
	IEEE 802.1Q VLAN
	IEEE 802.1p QoS
	IEEE 802.1D Spanning Tree Protocol
	IEEE 802.1w Rapid Spanning Tree Protocol
	IEEE 802.3af Power over Ethernet
	IEEE 802.3at Power over Ethernet Plus
Environment
Operating	Temperature: 0 ~ 50 degrees C
Operating	Relative Humidity: 5 ~ 95% (non-condensing)
Storage	Temperature: -10 ~ 70 degrees C
Storage	Relative Humidity: 5 ~ 95% (non-condensing)